{"id":1379945,"date":"2017-11-29T17:02:57","date_gmt":"2017-11-29T17:02:57","guid":{"rendered":"https:\/\/www.jacksonsart.com\/blog\/?p=1379945"},"modified":"2026-03-31T15:33:05","modified_gmt":"2026-03-31T14:33:05","slug":"wood-engraving-christmas-greetings-cards","status":"publish","type":"post","link":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/","title":{"rendered":"Making Handmade Cards with Wood Engraving"},"content":{"rendered":"<p>Wood engraving is a relief printmaking technique, like linocut. It&#8217;s not the easiest technique to get the hang of, but it&#8217;s a very versatile medium, and because the wood used is resilient, it is possible to run off a nearly unlimited number of prints. This makes it the perfect medium for creating Christmas or greetings cards; once the block has been cut, it can be used year-on-year.<\/p>\n<hr>\n<p>Before I begin, a disclaimer. Wood engraving is a complex process \u2013 far too complex to tackle in a single blog post. I will only cover the basics: what tools you will need; how to darken the block; how to use the tools; and how to print by hand. <\/p>\n<h2 style=\"font-size: 22px;\">Making Handmade Cards with Wood Engraving<\/h2>\n<p><\/p>\n<h5>Contents:<\/h5>\n<p><a href=\"#What\">What is a Wood Engraving?<\/a><\/p>\n<p><a href=\"#Need\">What you will need to Create your own Wood Engraving<\/a><\/p>\n<p><a href=\"#Guide\">A Short Guide to Wood Engraving Tools<\/a><\/p>\n<p><a href=\"#Darkening\">Darkening your Woodblock<\/a><\/p>\n<p><a href=\"#Designing\">Designing a Wood Engraving<\/a><\/p>\n<p><a href=\"#Printing\">Printing a Wood Engraving By Hand<\/a><\/p>\n<div id=\"What\"><\/div>\n<h2>What is a Wood Engraving?<\/h2>\n<p>Wood engraving is a relief printmaking process, like linocutting or potato-printing. It is not a sculptural process.<\/p>\n<p>Wood engravings are created when an artist uses engraving tools (also called &#8216;burins&#8217;) to\u00a0make incisions on the surface of an endgrain woodblock. When the woodblock is inked with a roller, these recessed incisions do not receive ink. The image is then printed onto paper by hand or in a press. The incisions show up the colour of the paper in the final print (generally white, or off-white). Areas where the flat surface of the block has been left intact will show up the colour of the ink (generally black).<\/p>\n<p>Endgrain woodblocks have been cut perpendicular to the direction of growth; they show rings rather than grain. This results in a dense, even surface which can hold fine detail.<\/p>\n<div id=\"Need\"><\/div>\n<h2>What You Will Need to Create Your Own Wood Engraving<\/h2>\n<ul>\n<li>A woodblock. Jackson&#8217;s stock <a href=\"https:\/\/www.jacksonsart.com\/studio\/printmaking-equipment\/printmaking-plates\/wood-engraving-blocks\" target=\"_blank\" rel=\"noopener noreferrer\">two sizes of end-grain wood engraving blocks<\/a>. They are made from Lemonwood, a slow-growing hardwood which is widely used by wood engravers. (It&#8217;s not the wood of a lemon tree).<\/li>\n<li>Some engraving tools. I will explain which tools below.<\/li>\n<li>Some black oil-based relief ink. Do not use water-based relief inks, because they will soak into your woodblock. This will open the grain and may cause the block to warp. Water-mixable oil-based inks such as <a href=\"https:\/\/www.jacksonsart.com\/brands\/caligo\/caligo-safe-wash-relief-ink\" target=\"_blank\" rel=\"noopener noreferrer\">Caligo Safewash<\/a>\u00a0are fine, but if you&#8217;re using a water-mixable oil-based ink, you should use a rag dipped in solvent to remove it from the woodblock, not water. Jackson&#8217;s also stock <a href=\"https:\/\/www.jacksonsart.com\/speedball-professional-relief-ink\" target=\"_blank\" rel=\"noopener noreferrer\">Speedball Professional Relief Inks<\/a>, which are perfect.<\/li>\n<li>A solvent, to remove oil-based inks from the woodblock after you&#8217;ve finished printing. I use <a href=\"https:\/\/www.jacksonsart.com\/jackson-s-english-distilled-turpentine-60ml\" target=\"_blank\" rel=\"noopener noreferrer\">Turpentine<\/a>\u00a0(you won&#8217;t need much).<\/li>\n<li>A rag, to apply the solvent to the woodblock.<\/li>\n<li>A spoon, to burnish your print.<\/li>\n<li>A roller. You could use a <a href=\"https:\/\/www.jacksonsart.com\/essdee-professional-ink-rollers-black-handle-10cm\" rel=\"noopener noreferrer\" target=\"_blank\">linocut roller<\/a>, though a PVC roller would be preferable.<\/li>\n<li>Some paper to plan your design on. Any fine art paper or cartridge paper will do.<\/li>\n<li>Some paper to print on. Nothing too rough or too thin; I used <a href=\"https:\/\/www.jacksonsart.com\/brands\/arches\/arches-velin\" target=\"_blank\" rel=\"noopener noreferrer\">Arches Velin Printmaking Paper<\/a>. (Thin paper is normally great for printing by hand, but in this case we need a paper which won&#8217;t just collapse when folded into a card and placed on a mantlepiece.)<\/li>\n<\/ul>\n<div id=\"Guide\"><\/div>\n<p><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Toolpicresized.jpeg\"><img fetchpriority=\"high\" decoding=\"async\" class=\"wp-image-1379981 size-full\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Toolpicresized.jpeg\" alt=\"\" width=\"1000\" height=\"667\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Toolpicresized.jpeg 1000w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Toolpicresized-300x200.jpeg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Toolpicresized-768x512.jpeg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Toolpicresized-620x414.jpeg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Toolpicresized-192x128.jpeg 192w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Toolpicresized-940x627.jpeg 940w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/a><\/p>\n<h2>A Short Guide to Wood Engraving Tools: Which Should I Buy First?<\/h2>\n<p>Wood engraving tools are properly called &#8216;burins&#8217;. They consist of a metal shank which is mounted on a wooden handle shaped like a mushroom. This stock is designed to fit in the engraver&#8217;s palm.<\/p>\n<p>The most commonly-used tools are as follows:<\/p>\n<ul>\n<li><strong>Lozenge Gravers<\/strong> have a shaft with a lozenge-shaped cross-section. They have a lozenge-shaped face and an extremely sharp tip. Because lozenge gravers are very sharp, wood engravers use them to create fine lines. The width of the line is dependent on the pressure used, and it is possible to create a flowing line which widens and contracts (though Square Gravers will create lines which vary in width more dramatically.) As well as line work, it is possible to produce short stabs which widen from a sharp point, or to lighten areas by stippling: repeatedly pecking at the wood with the tip of the tool, so that the surface bears a carpet of tiny incisions. Because of the shape of this tool, these incisions will look like scratches, not dots.<\/li>\n<li><strong>Square Gravers<\/strong>\u00a0have a shaft with a square cross-section. They have a diamond-shaped face and a sharp tip. They are particularly useful for cutting thin lines which swell dramatically. Because the width of the line is dependent on the pressure used, it is possible to create a flowing line which widens and contracts, or to make short stabs which widen from a sharp point. Square Gravers are also useful when lightening areas of a block by stippling: repeatedly pecking at the wood with the tip of the tool, so that the surface bears a carpet of tiny incisions. Because of the shape of this tool, these incisions will have slightly sharp edges; engravers wishing to stipple a surface with round dots would be better off using a small Round Scorper.<\/li>\n<li><strong>Tint Tools<\/strong> are designed for cutting straight lines of a constant width. The trade engravers of the Nineteenth century referred to a series of parallel lines as a &#8216;tint&#8217;. They used tints to depict colour and form; by varying the width and spacing of the lines that made up their tints, they were able to attain a sophisticated range of mid-tones, between the white of the paper and the black of the ink. These tools are quite difficult to use well and cannot cut curved lines, so they wouldn&#8217;t be a good first purchase.<\/li>\n<li><strong>Spitstickers<\/strong> have curved sides and a pointed tip. They are useful for\u00a0drawing long, fluid lines which curve gracefully, and which taper away rather than terminating in a flat or round edge (like lines drawn with a scorper). Used lightly, a spitsticker will score a thin line; the line will swell if the tool is engaged further into the wood.<\/li>\n<li><strong>Scorpers<\/strong> are useful for drawing bold lines or big dots, and for clearing away large areas of the block. They come in two varieties: <strong>Square<\/strong> and <strong>Round<\/strong>. Square Scorpers have a strait-sided shaft and a flat tip. They are used to cut a line of a constant width. Because the tip of the cutting face is completely flat, lines cut with this tool will begin and end abruptly, with a square edge. They will not swell or taper, like lines made with a spitsticker or a graver might; nor will they be rounded at the ends, like cuts made with a Round Scorper (which has a U-shaped tip).<\/li>\n<\/ul>\n<p>Every engraver seems to have a different selection of three tools which they would recommend purchasing first. My basic toolkit would include a <a href=\"https:\/\/www.jacksonsart.com\/ec-lyons-round-scorper-53\" target=\"_blank\" rel=\"noopener noreferrer\">medium Round Scorper<\/a>, a <a href=\"https:\/\/www.jacksonsart.com\/ec-lyons-square-graver-1\" target=\"_blank\" rel=\"noopener noreferrer\">fine Square Graver<\/a> and a <a href=\"https:\/\/www.jacksonsart.com\/ec-lyons-spitsticker-3\" target=\"_blank\" rel=\"noopener noreferrer\">medium Spitsticker<\/a>. If you think you will want to work in fine detail, perhaps replace the Medium Spitsticker with a <a href=\"https:\/\/www.jacksonsart.com\/ec-lyons-spitsticker-1\" target=\"_blank\" rel=\"noopener noreferrer\">Fine Spitsticker<\/a>.<\/p>\n<p>Two burins isn&#8217;t really enough, but my two would be a <a href=\"https:\/\/www.jacksonsart.com\/ec-lyons-round-scorper-53\" target=\"_blank\" rel=\"noopener noreferrer\">medium Round Scorper<\/a> and a <a href=\"https:\/\/www.jacksonsart.com\/ec-lyons-spitsticker-1\" target=\"_blank\" rel=\"noopener noreferrer\">fine Spitsticker<\/a>.<\/p>\n<figure id=\"attachment_1379976\" aria-describedby=\"caption-attachment-1379976\" style=\"width: 1000px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Lozengegraverscompared.jpg\"><img decoding=\"async\" class=\"wp-image-1379976 size-full\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Lozengegraverscompared.jpg\" alt=\"Wood Engraving\" width=\"1000\" height=\"1000\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Lozengegraverscompared.jpg 1000w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Lozengegraverscompared-150x150.jpg 150w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Lozengegraverscompared-300x300.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Lozengegraverscompared-768x768.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Lozengegraverscompared-620x620.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Lozengegraverscompared-940x940.jpg 940w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/a><figcaption id=\"caption-attachment-1379976\" class=\"wp-caption-text\">Three E.C. Lyons Lozenge Gravers. Note the lozenge-shaped shaft and face, and the extremely sharp tip.<\/figcaption><\/figure>\n<figure id=\"attachment_1379979\" aria-describedby=\"caption-attachment-1379979\" style=\"width: 1000px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/SquareGraverscompared.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-1379979 size-full\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/SquareGraverscompared.jpg\" alt=\"\" width=\"1000\" height=\"1000\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/SquareGraverscompared.jpg 1000w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/SquareGraverscompared-150x150.jpg 150w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/SquareGraverscompared-300x300.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/SquareGraverscompared-768x768.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/SquareGraverscompared-620x620.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/SquareGraverscompared-940x940.jpg 940w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/a><figcaption id=\"caption-attachment-1379979\" class=\"wp-caption-text\">Three E.C. Lyons Square Gravers. Note the square cross-section of the shaft and the square face.<\/figcaption><\/figure>\n<figure id=\"attachment_1379978\" aria-describedby=\"caption-attachment-1379978\" style=\"width: 1000px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Spitstickerscompared.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1379978 size-full\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Spitstickerscompared.jpg\" alt=\"Wood Engraving\" width=\"1000\" height=\"1000\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Spitstickerscompared.jpg 1000w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Spitstickerscompared-150x150.jpg 150w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Spitstickerscompared-300x300.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Spitstickerscompared-768x768.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Spitstickerscompared-620x620.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Spitstickerscompared-940x940.jpg 940w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/a><figcaption id=\"caption-attachment-1379978\" class=\"wp-caption-text\">Three E.C. Lyons Spitstickers. Note the sharp tip and the slight swell of the face above the tip. Engage the tool slightly deeper in the wood to widen your line.<\/figcaption><\/figure>\n<figure id=\"attachment_1379977\" aria-describedby=\"caption-attachment-1379977\" style=\"width: 1000px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/roundscorpers.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1379977 size-full\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/roundscorpers.jpg\" alt=\"Wood Engraving\" width=\"1000\" height=\"1000\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/roundscorpers.jpg 1000w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/roundscorpers-150x150.jpg 150w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/roundscorpers-300x300.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/roundscorpers-768x768.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/roundscorpers-620x620.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/roundscorpers-940x940.jpg 940w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/a><figcaption id=\"caption-attachment-1379977\" class=\"wp-caption-text\">Three E.C. Lyons Round Scorpers compared. These tools are great for rounded stipples, for drawing broad lines with rounded ends, or for clearing large areas of a woodblock quickly.<\/figcaption><\/figure>\n<figure id=\"attachment_1379980\" aria-describedby=\"caption-attachment-1379980\" style=\"width: 1000px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Squarescorpers.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1379980 size-full\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Squarescorpers.jpg\" alt=\"Wood Engraving\" width=\"1000\" height=\"1000\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Squarescorpers.jpg 1000w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Squarescorpers-150x150.jpg 150w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Squarescorpers-300x300.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Squarescorpers-768x768.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Squarescorpers-620x620.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Squarescorpers-940x940.jpg 940w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/a><figcaption id=\"caption-attachment-1379980\" class=\"wp-caption-text\">Three E.C. Lyons Square Gravers. These tools can be used to draw a broad line with square ends. They are also good for clearing large areas or creating angular stipples.<\/figcaption><\/figure>\n<figure id=\"attachment_1379982\" aria-describedby=\"caption-attachment-1379982\" style=\"width: 1000px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Tinttoolscompared.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1379982 size-full\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Tinttoolscompared.jpg\" alt=\"Wood Engraving\" width=\"1000\" height=\"1000\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Tinttoolscompared.jpg 1000w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Tinttoolscompared-150x150.jpg 150w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Tinttoolscompared-300x300.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Tinttoolscompared-768x768.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Tinttoolscompared-620x620.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Tinttoolscompared-940x940.jpg 940w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/a><figcaption id=\"caption-attachment-1379982\" class=\"wp-caption-text\">Three E.C. Lyons Tint Tools. These tools draw a straight line of a constant width. They shouldn&#8217;t be forced to cut corners, and you probably need at least three to attain a decent variation of tone in your tints. If you&#8217;re a beginner, perhaps save these for a later purchase.<\/figcaption><\/figure>\n<div id=\"Darkening\"><\/div>\n<h2>Darkening Your Woodblock<\/h2>\n<p>Before you begin engraving, you will need to darken your woodblock so that you can see the cuts as you make them.<\/p>\n<p>I am going to use Indian Ink for this purpose. Ideally, you would avoid putting water-based ink on the surface of a woodblock, but it takes a long time for oil paint or printing ink to dry and Indian Ink is easier to use and clean away. <a href=\"https:\/\/www.jacksonsart.com\/jacksons-indian-ink\" target=\"_blank\" rel=\"noopener noreferrer\">Jackson&#8217;s Indian Ink<\/a> comes in small bottles and works as well as any I have used for this purpose.<\/p>\n<p>Do not use dyes such as Dr Ph Martin&#8217;s Watercolour Ink to darken your woodblock. Instead of drying on the surface, they will sink down into the wood, staining it. If this happens then your cuts won&#8217;t show up. (You can rub talc into the cuts as you go, but that&#8217;s a messy and imperfect solution).<\/p>\n<ul>\n<li>Take a mop, hake or flat brush \u2013 I used a Raven Mop Brush \u2013 and dip it into the\u00a0Indian Ink. You don&#8217;t need it to be heavily loaded with ink, so brush the excess onto the lip of the bottle.<\/li>\n<li>Work methodically from the top of the woodblock down towards you. Try to achieve even coverage without flooding the block with ink.<\/li>\n<li>Carry on until the surface of the woodblock is an even black. Don&#8217;t work too slowly, or the ink will have dried in certain areas before you are finished.<\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Startingtoblacken.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-1380208\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Startingtoblacken.jpg\" alt=\"Wood Engraving\" width=\"1200\" height=\"800\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Startingtoblacken.jpg 1200w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Startingtoblacken-300x200.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Startingtoblacken-768x512.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Startingtoblacken-1024x683.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Startingtoblacken-620x413.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Startingtoblacken-192x128.jpg 192w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Startingtoblacken-940x627.jpg 940w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" \/><\/a><\/p>\n<p><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Stripesofblackink.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-1380209\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Stripesofblackink.jpg\" alt=\"Wood Engraving\" width=\"1200\" height=\"906\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Stripesofblackink.jpg 1200w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Stripesofblackink-300x227.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Stripesofblackink-768x580.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Stripesofblackink-1024x773.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Stripesofblackink-620x468.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Stripesofblackink-940x710.jpg 940w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" \/><\/a><\/p>\n<figure id=\"attachment_1380207\" aria-describedby=\"caption-attachment-1380207\" style=\"width: 1200px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Blackeningtheblock1.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1380207 size-full\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Blackeningtheblock1.jpg\" alt=\"Wood Engraving\" width=\"1200\" height=\"772\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Blackeningtheblock1.jpg 1200w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Blackeningtheblock1-300x193.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Blackeningtheblock1-768x494.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Blackeningtheblock1-1024x659.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Blackeningtheblock1-620x399.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/10\/Blackeningtheblock1-940x605.jpg 940w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" \/><\/a><figcaption id=\"caption-attachment-1380207\" class=\"wp-caption-text\">This is a good degree of coverage: a rich black which is not too thick.<\/figcaption><\/figure>\n<div id=\"Designing\"><\/div>\n<h2>Designing and Cutting Wood Engravings<\/h2>\n<p>Ideally, when designing a wood engraving, you will want to make sure your design has a mixture of light areas (where the surface of the block has largely\u00a0been cleared), dark areas (where it&#8217;s been left untouched) and mid-tones. Mid-tones can be achieved in a number of ways. Many engravers use thinly-spaced parallel lines of different widths to indicate flat surfaces; the thicker the lines, the lighter the tone. Another option is to cover the area in stippled dots; the more dots, and the larger the dots, the lighter the area.<\/p>\n<p>For my card, I decided to engrave a Christmas cactus in a decorated pot.\u00a0If you are planning a figurative engraving, try to make sure that you note how and where the light falls on your 3-dimensional object. In order to give the viewer a sense of the 3D nature of your subject (if that&#8217;s what you want), you will need to indicate lighter or darker areas, as well as the patterns and textures of the surface. In my case, I had a pattern of white curlicues running round the dark pot; these were engraved with a lozenge graver, and I took care to deepen the line in places where the pattern would catch the light. I also stippled these areas to bring them forward into the light a bit.<\/p>\n<p>It can be very difficult working out how to give a sense of the fall of light on an object as well as the texture or tone of the surface when you only have white and black at your disposal, but that&#8217;s the fun of the medium. If you need some inspiration, why not take a look at\u00a0<a href=\"http:\/\/www.tate.org.uk\/context-comment\/blogs\/tate-archive-40-1983-goupil-gallery-merchant-family-family-affair\" target=\"_blank\" rel=\"noopener noreferrer\">this elaborate advent-themed concertina by Mary Adshead and Stephen Bone<\/a>, these\u00a0<a href=\"https:\/\/www.fulltable.com\/vts\/aoi\/f\/farleigh\/we\/SH144.jpg\" target=\"_blank\" rel=\"noopener noreferrer\">more traditional designs by used by John Farleigh<\/a>, and <a href=\"https:\/\/i.pinimg.com\/originals\/e0\/e1\/10\/e0e110139333f9f2a66f3055a9c46447.jpg\" target=\"_blank\" rel=\"noopener noreferrer\">this piece made for the Redfern Press by Eric Ravilious<\/a>.<\/p>\n<p>A couple of helpful points to consider:<\/p>\n<ul>\n<li>Your drawing will be reversed when you print it, so draw (and write, if you&#8217;re including text) in reverse<\/li>\n<li>Designs composed of thin black lines with large areas of white are tiresome to engrave and can be difficult to print by hand<\/li>\n<li>Woodblock are expensive, so if you have a couple of designs, do think carefully about which one will fit your block better<\/li>\n<\/ul>\n<p>Once you have finished designing your engraving, you will need to transfer it to your block. You can either do this by simply copying the reversed design straight onto the surface of the block, using any drawing implement which will show up on the blackened surface (a soft pencil normally works, though it can get smudged during the engraving process.) Another option is to place the drawing over the block and trace the design through using transfer paper or carbon paper. If you do decide to draw through your design, use a sharp pencil, but don&#8217;t press down too hard or you may damage the surface of your woodblock.<\/p>\n<figure id=\"attachment_1417856\" aria-describedby=\"caption-attachment-1417856\" style=\"width: 1000px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Jacksons_Woodcut_Pinterest.jpg\" alt=\"\" width=\"1000\" height=\"1500\" class=\"size-full wp-image-1417856\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Jacksons_Woodcut_Pinterest.jpg 1000w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Jacksons_Woodcut_Pinterest-200x300.jpg 200w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Jacksons_Woodcut_Pinterest-683x1024.jpg 683w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Jacksons_Woodcut_Pinterest-768x1152.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Jacksons_Woodcut_Pinterest-620x930.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Jacksons_Woodcut_Pinterest-940x1410.jpg 940w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><figcaption id=\"caption-attachment-1417856\" class=\"wp-caption-text\">There&#8217;s no wrong way to hold a wood engraving tool, but this is a fairly orthodox grip.<\/figcaption><\/figure>\n<p>Once you have transferred your design, in reverse, onto your block, place it onto a stack of books. This is necessary because to cut a curved line, you will need to rotate the block with your free hand. Without a pile of books (or a leather sandbag, as shown in the photos) you will find it difficult to turn the block freely and will run the risk of burying an extremely sharp tool into your free hand.<\/p>\n<p>Hold the tool as shown above and push it gently over the surface so that it begins to lift a curl of wood off the block. This will feel more natural with practice. You shouldn&#8217;t have to push down to get the tool to cut \u2013 you should only have to push it forward. However, do be aware that if the tool you are using is a spitsticker, a graver or a round scorper, it will cut a deeper line when engaged further into the surface of the block.<\/p>\n<p>A couple of points to consider when cutting your engraving:<\/p>\n<ul>\n<li>Have a good long think before you make any cut; remember you can&#8217;t erase the marks<\/li>\n<li>You do not have to engrave your design deeply into the surface of the wood; cuts of less than a millimetre deep will show up nicely<\/li>\n<li>If you are clearing a large area of white, draw around the edge of the white area then use your largest tool to &#8216;scoop out&#8217; the middle; this will take less time and is less arduous<\/li>\n<\/ul>\n<div id=\"Printing\"><\/div>\n<h2>Rolling Out Ink and Printing<\/h2>\n<p>Once you have finished cutting your design, you will need to roll out your relief ink on a glass or perspex slab.<\/p>\n<p>Use a palette knife or some other implement to transfer a line of ink onto the slab. Only use a small amount of ink at first. Treat it like Marmite; you can always add more later if you need to.<\/p>\n<p>Roll the ink into a square, lifting the roller between each stroke. The ink will be tacky and you should start to hear a hiss. If you can&#8217;t hear that then you may have used the wrong ink, or too much of it.<\/p>\n<figure id=\"attachment_1417858\" aria-describedby=\"caption-attachment-1417858\" style=\"width: 1080px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_02.jpg\" alt=\"\" width=\"1080\" height=\"720\" class=\"size-full wp-image-1417858\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_02.jpg 1080w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_02-300x200.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_02-1024x683.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_02-768x512.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_02-620x413.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_02-192x128.jpg 192w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_02-940x627.jpg 940w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><figcaption id=\"caption-attachment-1417858\" class=\"wp-caption-text\">Rolling out ink for a wood engraving.<\/figcaption><\/figure>\n<p>Roll the ink over your design, taking care not to let the roller slip or to smear it over the surface of the block. (This shouldn&#8217;t be too much trouble as the ink will make the roller very tacky.) Three or four passes with a lightly-inked roller should be enough for the first print, one or two between subsequent impressions.<\/p>\n<p>Place your already-folded card firmly and decisively onto the block. The key thing is to place it vertically so as to avoid smudging. My technique is to place a thumb or finger on the inside of the card about where I want the centre of the design to be. I then press down through the paper onto the block.<\/p>\n<p>Work over each area of your design with the spoon, pressing very firmly and passing each area several times. You should try to leave at least a thumb or finger in place at all times, pinning the paper to the raised area of the block, otherwise the movement of the spoon will cause the paper to move, wrecking your print.<\/p>\n<p>Once you think you&#8217;re done, tilt your head and look at the paper in an oblique or raking light; you should be able to see the design on the inside of the card, lightly embossed. The effect will be easier to see with thin Japanese papers or dampened paper.<\/p>\n<p>Tips for printing:<\/p>\n<ul>\n<li>If you are using a reasonably thick paper, you will get better results if you dampen it before printing. This allows the fibres to soften<\/li>\n<li>Always keep at least one finger in place, pinning the paper to the raised area of the block. You&#8217;ll have to move your finger from this area in order to burnish it properly<\/li>\n<li>Try not to slip off the edge of the block or to burnish areas of white; you&#8217;ll crush the surface of the card if you do this<\/li>\n<\/ul>\n<figure id=\"attachment_1417859\" aria-describedby=\"caption-attachment-1417859\" style=\"width: 1080px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_03.jpg\" alt=\"\" width=\"1080\" height=\"720\" class=\"size-full wp-image-1417859\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_03.jpg 1080w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_03-300x200.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_03-1024x683.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_03-768x512.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_03-620x413.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_03-192x128.jpg 192w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_03-940x627.jpg 940w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><figcaption id=\"caption-attachment-1417859\" class=\"wp-caption-text\">Burnishing the print with a wooden spoon. We used Arches Velin paper, which is a little thicker than is ideal for burnishing, because it&#8217;s stiff enough to be folded into a robust greetings card.<\/figcaption><\/figure>\n<figure id=\"attachment_1417860\" aria-describedby=\"caption-attachment-1417860\" style=\"width: 1080px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_04.jpg\" alt=\"\" width=\"1080\" height=\"720\" class=\"size-full wp-image-1417860\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_04.jpg 1080w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_04-300x200.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_04-1024x683.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_04-768x512.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_04-620x413.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_04-192x128.jpg 192w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_04-940x627.jpg 940w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><figcaption id=\"caption-attachment-1417860\" class=\"wp-caption-text\">Taking a couple of prints from the block to see whether any alterations need to be made.<\/figcaption><\/figure>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_05.jpg\" alt=\"\" width=\"1080\" height=\"720\" class=\"aligncenter size-full wp-image-1417861\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_05.jpg 1080w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_05-300x200.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_05-1024x683.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_05-768x512.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_05-620x413.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_05-192x128.jpg 192w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_05-940x627.jpg 940w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/p>\n<figure id=\"attachment_1417862\" aria-describedby=\"caption-attachment-1417862\" style=\"width: 1080px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_06.jpg\" alt=\"\" width=\"1080\" height=\"720\" class=\"size-full wp-image-1417862\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_06.jpg 1080w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_06-300x200.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_06-1024x683.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_06-768x512.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_06-620x413.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_06-192x128.jpg 192w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_06-940x627.jpg 940w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><figcaption id=\"caption-attachment-1417862\" class=\"wp-caption-text\">You might need to make alterations to your design after taking a proof, or to lower the edges of the block, to stop them taking ink from the roller and printing random dots around your image. Best not to do it with the block flat on the table, as here; the author is running the risk of stabbing himself between the thumb and forefinger. Please note, that it is good practice to keep both of your hands behind the sharp end of the tool to prevent injury while working.<\/figcaption><\/figure>\n<figure id=\"attachment_1417863\" aria-describedby=\"caption-attachment-1417863\" style=\"width: 1080px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_07.jpg\" alt=\"\" width=\"1080\" height=\"720\" class=\"size-full wp-image-1417863\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_07.jpg 1080w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_07-300x200.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_07-1024x683.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_07-768x512.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_07-620x413.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_07-192x128.jpg 192w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_07-940x627.jpg 940w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><figcaption id=\"caption-attachment-1417863\" class=\"wp-caption-text\">Our finished card. With a little more burnishing in the middle, this would have been a perfect print. Certainly good enough to use though!<\/figcaption><\/figure>\n<hr>\n<h2>Further Reading<\/h2>\n<p><a href=\"https:\/\/www.jacksonsart.com\/blog\/2023\/02\/07\/printmaking-with-metallic-ink\/\" rel=\"noopener\" target=\"_blank\">Printmaking With Metallic Ink<\/a><\/p>\n<p><a href=\"https:\/\/www.jacksonsart.com\/blog\/2021\/07\/06\/everything-you-need-to-know-about-printmaking-paper\/\" rel=\"noopener\" target=\"_blank\">Everything You Need to Know About Printmaking Paper<\/a><\/p>\n<p><a href=\"https:\/\/www.jacksonsart.com\/blog\/2022\/05\/12\/etching-for-beginners-what-you-need-to-get-started\/\" rel=\"noopener\" target=\"_blank\">Etching for Beginners \u2013 What You Need to Get Started<\/a><\/p>\n<p><a href=\"https:\/\/www.jacksonsart.com\/blog\/2024\/01\/24\/on-location-at-awagami-factory\/\" rel=\"noopener\" target=\"_blank\">How Awagami Washi Paper is Made<\/a><\/p>\n<p><strong><a href=\"https:\/\/www.jacksonsart.com\/studio\/printmaking-equipment\" rel=\"noopener\" target=\"_blank\">Shop Printmaking on jacksonsart.com<\/a><\/strong><\/p>\n<p><a href=\"https:\/\/www.jacksonsart.com\/newsletter\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2021\/02\/JAS_blog-team_Series_Banner_02.jpg\" alt=\"\" width=\"1500\" height=\"500\" class=\"aligncenter size-full wp-image-1421205\" srcset=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2021\/02\/JAS_blog-team_Series_Banner_02.jpg 1500w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2021\/02\/JAS_blog-team_Series_Banner_02-300x100.jpg 300w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2021\/02\/JAS_blog-team_Series_Banner_02-1024x341.jpg 1024w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2021\/02\/JAS_blog-team_Series_Banner_02-768x256.jpg 768w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2021\/02\/JAS_blog-team_Series_Banner_02-620x207.jpg 620w, https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2021\/02\/JAS_blog-team_Series_Banner_02-940x313.jpg 940w\" sizes=\"(max-width: 1500px) 100vw, 1500px\" \/><\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Wood engraving is a relief printmaking technique, like linocut. It&#8217;s not the easiest technique to get the hang of, but [&hellip;]<\/p>\n","protected":false},"author":16,"featured_media":1417857,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[477],"tags":[],"class_list":["post-1379945","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-printmaking-art-technique"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.3 (Yoast SEO v27.3) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Making Handmade Cards with Wood Engraving - Jackson&#039;s Art Blog<\/title>\n<meta name=\"description\" content=\"This article describes what you will need to make your own wood engraving and to print Christmas or greetings cards from them.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Making Handmade Cards with Wood Engraving\" \/>\n<meta property=\"og:description\" content=\"This article describes what you will need to make your own wood engraving and to print Christmas or greetings cards from them.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/\" \/>\n<meta property=\"og:site_name\" content=\"\u00a0Jackson&#039;s Art Blog\" \/>\n<meta property=\"article:published_time\" content=\"2017-11-29T17:02:57+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-03-31T14:33:05+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_01.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1080\" \/>\n\t<meta property=\"og:image:height\" content=\"720\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Duncan Montgomery\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Duncan Montgomery\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"16 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/\"},\"author\":{\"name\":\"Duncan Montgomery\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/#\\\/schema\\\/person\\\/c61f01c19e409e2e833897d1333d810a\"},\"headline\":\"Making Handmade Cards with Wood Engraving\",\"datePublished\":\"2017-11-29T17:02:57+00:00\",\"dateModified\":\"2026-03-31T14:33:05+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/\"},\"wordCount\":3140,\"commentCount\":3,\"publisher\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/wp-content\\\/uploads\\\/2017\\\/11\\\/Printmaking_woodcut_01.jpg\",\"articleSection\":[\"Printmaking\"],\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/\",\"url\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/\",\"name\":\"Making Handmade Cards with Wood Engraving - Jackson's Art Blog\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/wp-content\\\/uploads\\\/2017\\\/11\\\/Printmaking_woodcut_01.jpg\",\"datePublished\":\"2017-11-29T17:02:57+00:00\",\"dateModified\":\"2026-03-31T14:33:05+00:00\",\"description\":\"This article describes what you will need to make your own wood engraving and to print Christmas or greetings cards from them.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/wp-content\\\/uploads\\\/2017\\\/11\\\/Printmaking_woodcut_01.jpg\",\"contentUrl\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/wp-content\\\/uploads\\\/2017\\\/11\\\/Printmaking_woodcut_01.jpg\",\"width\":1080,\"height\":720},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/2017\\\/11\\\/29\\\/wood-engraving-christmas-greetings-cards\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Making Handmade Cards with Wood Engraving\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/\",\"name\":\"Jackson's Art Blog\",\"description\":\"\u00a0Jackson&#039;s Art\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/#organization\",\"name\":\"Jackson's Art Blog\",\"alternateName\":\"Jackson's Art\",\"url\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/wp-content\\\/uploads\\\/2019\\\/02\\\/logo.svg\",\"contentUrl\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/wp-content\\\/uploads\\\/2019\\\/02\\\/logo.svg\",\"caption\":\"Jackson's Art Blog\"},\"image\":{\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/#\\\/schema\\\/person\\\/c61f01c19e409e2e833897d1333d810a\",\"name\":\"Duncan Montgomery\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/author-duncan-montgomery-300x300.png\",\"url\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/author-duncan-montgomery-300x300.png\",\"contentUrl\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/author-duncan-montgomery-300x300.png\",\"caption\":\"Duncan Montgomery\"},\"description\":\"Back in 2016 and 2017 Duncan wrote a plethora of insightful articles for the Jackson's Art Blog; artist interviews as well as posts on drawing and printmaking. In Duncan's own art practice he primarily works with wood engraving and poetry.\",\"url\":\"https:\\\/\\\/www.jacksonsart.com\\\/blog\\\/author\\\/duncan-montgomery\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Making Handmade Cards with Wood Engraving - Jackson's Art Blog","description":"This article describes what you will need to make your own wood engraving and to print Christmas or greetings cards from them.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/","og_locale":"en_GB","og_type":"article","og_title":"Making Handmade Cards with Wood Engraving","og_description":"This article describes what you will need to make your own wood engraving and to print Christmas or greetings cards from them.","og_url":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/","og_site_name":"\u00a0Jackson&#039;s Art Blog","article_published_time":"2017-11-29T17:02:57+00:00","article_modified_time":"2026-03-31T14:33:05+00:00","og_image":[{"width":1080,"height":720,"url":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_01.jpg","type":"image\/jpeg"}],"author":"Duncan Montgomery","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Duncan Montgomery","Estimated reading time":"16 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/#article","isPartOf":{"@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/"},"author":{"name":"Duncan Montgomery","@id":"https:\/\/www.jacksonsart.com\/blog\/#\/schema\/person\/c61f01c19e409e2e833897d1333d810a"},"headline":"Making Handmade Cards with Wood Engraving","datePublished":"2017-11-29T17:02:57+00:00","dateModified":"2026-03-31T14:33:05+00:00","mainEntityOfPage":{"@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/"},"wordCount":3140,"commentCount":3,"publisher":{"@id":"https:\/\/www.jacksonsart.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/#primaryimage"},"thumbnailUrl":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_01.jpg","articleSection":["Printmaking"],"inLanguage":"en-GB","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/","url":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/","name":"Making Handmade Cards with Wood Engraving - Jackson's Art Blog","isPartOf":{"@id":"https:\/\/www.jacksonsart.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/#primaryimage"},"image":{"@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/#primaryimage"},"thumbnailUrl":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_01.jpg","datePublished":"2017-11-29T17:02:57+00:00","dateModified":"2026-03-31T14:33:05+00:00","description":"This article describes what you will need to make your own wood engraving and to print Christmas or greetings cards from them.","breadcrumb":{"@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/"]}]},{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/#primaryimage","url":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_01.jpg","contentUrl":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2017\/11\/Printmaking_woodcut_01.jpg","width":1080,"height":720},{"@type":"BreadcrumbList","@id":"https:\/\/www.jacksonsart.com\/blog\/2017\/11\/29\/wood-engraving-christmas-greetings-cards\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.jacksonsart.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Making Handmade Cards with Wood Engraving"}]},{"@type":"WebSite","@id":"https:\/\/www.jacksonsart.com\/blog\/#website","url":"https:\/\/www.jacksonsart.com\/blog\/","name":"Jackson's Art Blog","description":"\u00a0Jackson&#039;s Art","publisher":{"@id":"https:\/\/www.jacksonsart.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.jacksonsart.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":"Organization","@id":"https:\/\/www.jacksonsart.com\/blog\/#organization","name":"Jackson's Art Blog","alternateName":"Jackson's Art","url":"https:\/\/www.jacksonsart.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.jacksonsart.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2019\/02\/logo.svg","contentUrl":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2019\/02\/logo.svg","caption":"Jackson's Art Blog"},"image":{"@id":"https:\/\/www.jacksonsart.com\/blog\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.jacksonsart.com\/blog\/#\/schema\/person\/c61f01c19e409e2e833897d1333d810a","name":"Duncan Montgomery","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2026\/10\/author-duncan-montgomery-300x300.png","url":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2026\/10\/author-duncan-montgomery-300x300.png","contentUrl":"https:\/\/www.jacksonsart.com\/blog\/wp-content\/uploads\/2026\/10\/author-duncan-montgomery-300x300.png","caption":"Duncan Montgomery"},"description":"Back in 2016 and 2017 Duncan wrote a plethora of insightful articles for the Jackson's Art Blog; artist interviews as well as posts on drawing and printmaking. In Duncan's own art practice he primarily works with wood engraving and poetry.","url":"https:\/\/www.jacksonsart.com\/blog\/author\/duncan-montgomery\/"}]}},"_links":{"self":[{"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/posts\/1379945","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/users\/16"}],"replies":[{"embeddable":true,"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/comments?post=1379945"}],"version-history":[{"count":61,"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/posts\/1379945\/revisions"}],"predecessor-version":[{"id":1575929,"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/posts\/1379945\/revisions\/1575929"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/media\/1417857"}],"wp:attachment":[{"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/media?parent=1379945"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/categories?post=1379945"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.jacksonsart.com\/blog\/wp-json\/wp\/v2\/tags?post=1379945"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}