A clear blocker finish for Fleur’s Rust effect products. Apply a singular coat with a brush or roller (with a completely clean tool) after a minimum of 18 hours and a maximum of 48 hours have elapsed since the reagent has been applied to the rust coat. This will prevent the rust from over oxidising and becoming too flaky or producing an undesired effect.

Fleur Designer’s Paint Rust contains tiny iron particles that oxidize when you apply the specific Reagent. The result is a real rust coating, which can be more or less homogeneous according to the type of application (roller, brush, sea sponge, etc.). Once you have reached the desired effect, the application of Fleur’s Anti-oxidant Finish protects the Rust and stops the oxidation process.

Fleur Designer’s Paint Rust products are professional, water basedd, easy to use and perfect for obtaining real rust coatings on all surfaces such as wood, metal, plastic, glass, etc. Available in two shades.

Application cycle
• 1. 2 Coats of Rust
• 2. 1 Coat of Reagent

Optional 1 Coat of Primer to insulate the surface and 1 Coat of Anti-oxidant Finish for better protection.

Note: with the 130 ml jar, you can cover about 1 m2 of surface. With the 330 ml, you can cover about 2,5 m2 of surface. The Reagent consumption depends on the desired effect.