Hangi To : Right Handed Flat Japanese Woodcut Tool : 6mm

SKU: RKMHR6

Precio:

36,25 €

Información de Envío y Expedición
Hangi To - This is the quintissential Japanese carving tool. Held upright in the fist with the thumb on the top it is used for outlining your design with flexibility and accuracy. You can add control by placing the opposite index finger against the blade as you cut. We carry Hangi-To in a variety of sizes for the left handed and right handed artist, so please double check when ordering.
  • Right handed knife
  • High performance two part steel
  • Blade width 6mm
  • Long blade to move up as it wears down over time

Info

The great legacy of blade technology in Japan and the requirement for precision carving in the production of Ukyo-e prints gave rise to the development of carving tools such as these. Crafted from a high-quality two-part steel: a high carbon steel which holds the cutting edge, laminated to a softer steel which provides strength with a little flexibility to help prevent breakage. The tools leave the factory very sharp so please take care when handling.

They are designed with a long blade that as it is sharpened down can be moved forward within the handle:

For U and V gouges do this you by removing the brass ferrule to splay open the cherrywood handle. The long blade has a curved tip on the back end that can be pressed back into the wood one it is re-positioned. This stops it slipping back when carving.

For the Hangi-To blade, remove the brass ferrule and lift the blade up out of the groove in the handle. If the brass ferrule doesn't slide off easily then try prising it off with a blade under the long side of the ferrule, or wrap the ferrule in a cloth and gently prise off with pliers.

Especificación

Product CodeRKMHR6
TransparenciaN/A
Blade Width6 mm
CalidadExcelente
VeganoVegan
Weight (kg)0.024000

Opiniones

Escribir una Opinión

Compartir