* Low viscosity - very fluid.
* Produces a matt finish
* Does not drastically reduce color depth as does matt Medium.
* 100% acrylic polymer varnish. Water soluble when wet. Good chemical and water resistance when dry.
* Dry to a non-tacky, hard, flexible surface that is resistant to retention of dirt.
* Resist discoloring (non-yellowing, non-fogging) due to humidity, heat and ultraviolet light.
* Depending upon substrate, allows moisture to pass through (breathable).
* Will not crack as surface expands and contracts during temperature and humidity changes. Applicable for any acrylic painted surface (flexible and rigid) on canvas, paper, wood, stone, Plexiglas, etc.
* Not for use over oil paint.
* Flexible, archival, non-yellowing and water resistant when dry.
* For interior and exterior use

Application:

* Apply as a final varnish over dry acrylic paint.
* Varnish surface and environment must be clean, dry and dust free.
* Acrylic paintings must be completely dried and cured for a minimum 48-72 hours before varnishing.
* Application may be done by brush or spray. Generally a sprayed application will be thinner, smoother and more even. Rolling or sponging application is not recommended.
* If more than 1 varnish coat is desired, apply 1-2 coats of Liquitex Gloss Varnish before applying a final coat of Liquitex matt Varnish.
* Caution: Acrylic paints and mediums become increasingly brittle in cold weather. Do not apply below 60 degrees.

Thinning: Do not thin, as it will weaken the varnish film and adhesion.  

Removal: Not removable. Do not attempt to remove these varnishes with harsh solvents.