The Zest It Airbrush Reviver is ideal for cleaning and releasing an Airbrush clogged with Acrylic paint or a water based media.
If your Airbrush is clogged and has dried paint blocking it, then a soak in the Airbrush Reviver will restore it back to full working order. Put a small amount of the Zest It Airbrush Reviver into a shallow tray. Having disconnected the airline, disassemble the airbrush and place in the fluid. Once the airbrush parts are clean, wash with water, dry and re-assemble the airbrush.
The Reviver will make your fingers slippery, so it is best to use Nitrile gloves for grip and hand protection or a bowl of water and hand-towel to clean and dry your hands as you work. You may otherwise find the small parts of the airbrush slipping out of your grip. Working with a paper cloth or a towel also helps.
Most acrylic, gouache, watercolour and ink products can be cleaned and released from the airbrush after a 10 minute. Different products may require a longer soak.
The Reviver can be re-used by allowing to stand and then filtered (using cloth or paper) into a clean container. Label and store the used Zest-it Airbrush Reviver for re-use.
|To use with||Airbrush|
|Size : ml||125 ml|
|Hazardous UN Number||UN3082|
|Hazardous Type||Dangerous for the Environment, Health hazard/Hazardous to the ozone|