Pebeo Glazing Resin and Casting Resin

Last updated: May 19, 2016
Words by
Prefer Jackson's Art on Google

Pebeo Gedeo Resins are easy to use, you only have to mix two parts resin with one part hardener. Then either pour the resin over an item to coat it (Glazing Resin) or pour it into a mould to make a jewel-like casting (Casting Resin).

The Glazing Resin can be applied onto canvas, metal, wood, photos, postcards, and more. This is a popular canvas finishing method I have seen that looks like a thick, shiny varnish layer. To use the Casting Resin you can make your own mould using Pebeo Siligum to make an imprint of an object or simply use Pebeo’s selection of silicone moulds, professional moulds that are unbreakable, self-releasing, multi-cavity, and ultra-flexible.

Pebeo Gedeo Sculpture


Glazing Resin
Transparent and solid, glazing resin will create, through surface tension, self-rounded edges without spilling over when applied to a flat, level surface. This will give you a wet-look, magnifying-glass effect when poured over canvas instead of a traditional varnish or on top of a varnish for extra depth and gloss. I have seen quite a few paintings recently that use this method.

glazed postcard

Post cards glazed with the Pebeo Glazing Resin
Post cards glazed with the Pebeo Glazing Resin
Post cards glazed with the Pebeo Glazing Resin
Post cards glazed with the Pebeo Glazing Resin

Usually applied over acrylic paint on almost any surface (canvas, paper, metal, glass, etc.) it can also be applied over 3D paints like Vitrail and Prisme colours to fill in between the raised areas of paint and level the surface.
The key tip is to create a little roof over the canvas that prevents dust settling on it for the 12 hours it takes to cure, because it is so glossy that any speck of dust will show. See the videos for more info.


Mixed Media Resin
You can also use the resin as a painting resist by applying it to your surface and then painting or staining over the top with fluid colour. The colour will not penetrate where the glass-like resin has been applied.

For building up transparent layers in a thick surface Pebeo have created
Liquid Art Panels. These wooden painting panels have leak-proof raised sides to hold in your poured paints or resins, particularly good for embedding objects in resin. (They would also probably work well for encaustic painting.


Pebeo Casting Resins
Pebeo’s resins for casting can be poured into many types of moulds. Choose from the jewel colours, the crystal clear or the pearly colours.

The new range of Pebeo Gedeo resins
The new range of Pebeo Gedeo resins

Gédéo's new range of resins

Gédéo's new range of resins

Gédéo's new range of resins

Jade Colour


Testing the Resins
I tested the casting resin by making some small moulds using Pebeo Siligum from bits of old jewellery. The mould making was very easy and the mould came out with all the detail of the object. It peeled off the jewellery which was not damaged, but maybe test part of your object first to be sure you don’t damage yours. The mould is flexible and can be reused many times. I coated mine with Vaseline as a release agent using a cotton bud, Pebeo also make a Liquid Vaseline for easier application into the grooves of your mould.
I then mixed the two parts of the resin, poured between two cups to be extra sure of the mixing and poured into the moulds. I created a roof above to prevent dust settling while it cured.

Gédéo's new range of resins jacksons art
Siligum moulds made from jewellery and the Casting Resin results
Gédéo's new range of resins jacksons art
With a ‘roof’ to protect the surface from dust during curing period

I found that the Casting Resin was very fluid and the mould needed to be very level.
It stayed very fluid for many hours.
It went further than I thought, I had extra left over that made a little casting of the bottom of the cup.
After demoulding I could trim excess bits with a stanley knife. The object was slightly soft and could be slowly bent and shaped.

Gédéo's new range of resins jacksons art

Gédéo's new range of resins jacksons art
Casting resin
Gédéo's new range of resins jacksons art
Glazing resin being mixed. The bubbles you see do not remain.

When I mixed the Glazing Resin I found it to be much less fluid than the Casting Resin, more thick like honey, and it didn’t go very far, I had to mix a second batch to cover my area. The package states that the 150ml package can glaze up to 5 postcards (10.5×14.8cm), which sounds about right. It started setting much sooner than casting resin and I discovered that you should not move it after you have poured the resin on your surface as little wrinkles can form if it shifts.
The bubbles visible in the mixing cup did not remain (in either the Glazing Resin or the Casting Resin) after the curing time.
Both the Glazing and Casting Resins contain instructions that tell you how to measure for mixing the correct amount you will need.


Artists using Pebeo Gedeo resins in their work include:

“Jenny Muncaster is a professional artist working from The Colour Factory in Winchester with a group of complimentary artists to create exciting and progressive works. Jenny’s paintings possess a naive charm and are both quirky and colourful, imbuing a sense of joie de vivre. She works on canvas or gesso board in acrylics combining colour and techniques to produce vibrant, energetic, lively paintings. Her work includes resins and mediums to enhance her passion for painting the English Coast, special bottles of wine and her favourite ingredients for the preparation of wonderful food.”

“Working with mixed media techniques using Pébéo products is pure joy. These products allow unequalled liberty of movement and a multitude of possibilities in relation to colours, textures as well as the numerous effects obtained from the combination of different products. The results are both surprising and endless.” -artist Maude Charland Lallier

“I truly enjoy the new Mixed Media products by Pébéo as the creative possibilities are endless. I love the Fantasy collection with the Moon and Prisme effects, marvellous colours that create spectacular abstracts. The resin products are easy to use and work with, and the results will simply astonish you. You are sure to discover the artist within with these new unique products.” -artist Maddylane

“Colour, texture, shape, and light define unique and ever-changing applications of these new-age mediums produced by Pébéo. Ideas may or may not be preconceived, as I allow the paints and mediums to interact in a spontaneous manner in order to create an impactive visual effect.” -artist Dennis Metcalf


Click on the underlined links to go to the products on the Jackson’s Art Supplies website.
Postage on orders shipped standard to mainland UK addresses is free for orders of £39.

Julie Caves is a long-standing contributor to Jackson’s Art Blog and previously served as its Editor for ten years. With an encyclopaedic knowledge of art materials, she writes in-depth articles, particularly about oil and acrylic painting, bringing an extensive research background to each piece. Julie studied journalism in California, fine art at the University of Texas at Austin, and completed both an MA at Camberwell College of Art and the Turps Studio Painting Programme in London. She exhibits her work regularly and continues to write part-time for the blog.

1 COMMENTS

LEAVE A COMMENT

1 thought on “Pebeo Glazing Resin and Casting Resin”

  1. Pingback: Links From Wind Turbines To Elephants. Huh? | An Inkophile's Blog

Comments are closed.

YOU MIGHT LIKE

,

Practical Advice For Overcoming Creative Stagnation

, ,

Preparatory Drawing Methods for Painting

, , ,

Film: A Guide to Studio Safety

Scroll to Top