Iwata : Compressor : Smart Jet Pro

The Iwata Smart Jet Pro airbrush compressor is compact, quiet, and designed for low to medium output, with an adjustable working pressure of 1-30 PSI.

It features auto shut-off technology, allowing the compressor to power down when not in use, helping extend motor life by reducing workload over time. A built-in moisture filter prevents pulsation and traps condensation, delivering clean, dry air. The fully adjustable air regulator, paired with a clear pressure gauge, ensures precise control.

The durable outer case protects the unit and includes a convenient mounted airbrush holder. An air intake filter shields the motor from dust and particulates, with easy access for quick replacement.

The Smart Jet Pro also includes a high-strength polyurethane air hose for Iwata airbrushes, along with adaptors for Badger, Aztek, and Paasche airbrushes, a replacement intake filter, and a detailed operation manual.

Technical information:

• Pressure Category: Low to Medium
• Horsepower (HP): Quiet running 1/8 HP induction motor
• Air Flow at 60 PSI (CFM): 0.71
• Air Flow at 60 PSI (LPM): 20
• Max Pressure: 50 psi (0.34 MPa)
• Working Pressure: 1–30 psi (0.01–0.21 MPa)
• Voltage Requirement: 110–120V 60 Hz / 220–240V 50Hz
• Plug Type: B
• Approved Region: North America
• Includes Adapters: For Badger, Aztek, and Paasche air hoses
• Airbrush Holder: Built-in holder
• Outlet: 1 × 1/4 BSP
• Dimensions: 6.69 × 14.96 × 10.43 in (170 × 380 × 265 mm)
• Weight: 5.37 kg / 11.84 lbs
• Noise Level: 59 dB
• Duty Cycle: 60 minutes continuous use; allow 20 minutes rest
• Automatic Shut-Off: Turns off when not in use