TotalCast : Clear Artwork Resin Kit : 2kg

TotalCast Resin is an optically clear, high-gloss, hybrid polymer resin system that is suitable for the protection and decoration of artwork, paintings, or sculptures. This is because it provides a tough coating with good abrasion resistance.

It is easy to use because it cures at room temperature and is self-levelling. The resin is non-flammable, odour-free, and has no solvent content. It is also free of volatile organic compounds (VOCs) and has non-yellowing properties. It is for use on all art surfaces including canvas, wood, MDF, and photographs, and can be used over acrylic, oil, watercolour, and enamel paint.

This kit consists of 1kg of each component (1kg Resin and 1kg Hardener). The Mixing Ratio is 1:1

Please note, the mixing ratio must be accurately followed. It is not possible to change the ratio. This would adversely affect the mechanical properties of the resin and would lead to it not drying properly. The mixture should be thoroughly stirred (mix for 3-4 mins) to ensure full homogeneity. Polymer systems tend to heat up much faster in a pot than as a thin film. Therefore, mix only the necessary amount usable within the given pot life.

This is a TotalCast Clear Artwork Resin Kit 2kg.

Warning:
Contains substances dangerous to health that may cause irritation, dizziness, or allergic reactions.

Warning:
Contains substances that can cause serious damage to the environment.