ABIG : Printing Press : Gear Box : 600x900mm : Model 17360

This Abig Geared Drive Printing Press is designed for both relief and intaglio printing. The sturdy frame is made from cast aluminium and the top and bottom rollers are both 80mm diameter steel. Adjustable pressure can be applied evenly to the upper roller from each end, and the top roller can be lifted to a clearance of 24mm to allow for thicker relief plates. It is driven by a four-spoke handwheel via a planetary gear box with a reduction ratio of 3:1. Each press comes with a printing plate/bed made from 2.5mm zinc-plated steel screwed to a plywood base that moves accurately through the press on guided rollers. The bed comes with coated strips on the side panels to provide friction-free movement. This is a friction-driven press – if using with lino or any plate that is more than 1mm thick, it is helpful to have runners (lengths of lino or wood the same height) to ensure even pressure and assist the bed to engage. These presses are constantly developed, and from time to time, engineering improvements are made.

Clearance Height approx. 24mm (up to 40 mm on special request).

Details;

• Roller width: 600mm
• Diameter top roller: 80mm
• Diameter bottom roller: 80mm
• Bed width: 600mm
• Bed length: 900mm
• Weight: approx. 40.6kg
• Clearance height: approx. 24mm
• Paper up to A1 size