Daler-Rowney FW Mixed Media Paint Markers can be used with a wide variety of liquid media such as acrylic inks, watercolour paints or drawing inks, or filled with water for use as a blender of watercolour pencils. They consist of a refillable barrel and a replaceable fibre nib, both of which are available in a wide range of sizes.

The barrels and nibs can be washed out with water if you wish to change inks. If you are using acrylics, acrylic inks or drawing inks, simply fill the markers from the tube or (if mixing your own colour) add paint using a dropper pipette. If using watercolours, add water, then squeeze a few drops from your watercolour tube or tubes into the top of the barrel. Please be aware that paints such as pearlescent or metallic acrylics which contain mica crystals or sizeable particles will not work in Daler FW Mixed Media Paint Markers, as the particles will block the passage of ink through the nib.

These markers are pump markers, which means that they must be pressed against the paper a few times before use, to allow the ink to saturate the fibre tip. It is best to perform this operation on a spare sheet of paper. Markers should be shaken before use and stored horizontally with the cap on when not in use.

This is a pack of one FW Mixed Media Paint Marker equipped with a Large Flat 8-15mm nib. The set also includes a spare nib of the same size.